• アイスランド(ISK Kr)
  • アイルランド(EUR €)
  • ガーナ(GHS ₵)
  • カーボベルデ(CVE $)
  • ガーンジー(GBP £)
  • アゼルバイジャン(AZN ман)
  • アセンション島(SHP £)
  • タークス・カイコス諸島(USD $)
  • バーレーン(BHD .د.ب)
  • ハード島・マクドナルド諸島(AUD AU$)
  • アフガニスタン(USD $)
  • マーシャル諸島(USD $)
  • アメリカ合衆国(USD $)
  • アメリカ領サモア(USD $)
  • アラブ首長国連邦(AED د.إ)
  • アルジェリア(DZD د.ج)
  • アルゼンチン(USD $)
  • アルバ(AWG ƒ)
  • アルバニア(ALL L)
  • アルメニア(AMD Դ)
  • アンギラ(XCD $)
  • アンゴラ(USD $)
  • アンティグア・バーブーダ(XCD $)
  • アンドラ(EUR €)
  • イエメン(YER ﷼)
  • イギリス(GBP £)
  • イギリス領インド洋地域(USD $)
  • イスラエル(ILS ₪)
  • イタリア(EUR €)
  • イラク(USD $)
  • インド(INR ₹)
  • インドネシア(IDR Rp)
  • ヴァージン諸島(USD $)
  • ウォリス・フツナ(XPF ₣)
  • ウガンダ(UGX Sh)
  • ウクライナ(UAH ₴)
  • スーダン(SDG ج.س.)
  • ウズベキスタン(UZS лв)
  • ブータン(BTN Nu.)
  • ブーベ島(USD $)
  • ウルグアイ(UYU $)
  • ルーマニア(RON L)
  • エクアドル(USD $)
  • エジプト(EGP E£)
  • エストニア(EUR €)
  • エスワティニ(USD $)
  • セーシェル(USD $)
  • エチオピア(ETB Br)
  • エリトリア(ERN Nfk)
  • エルサルバドル(USD $)
  • オマーン(OMR ر.ع.)
  • オーストラリア(AUD AU$)
  • オーストリア(EUR €)
  • オーランド諸島(EUR €)
  • コートジボワール(XOF Fr)
  • トーゴ(XOF Fr)
  • ノーフォーク島(AUD AU$)
  • ポーランド(PLN zł)
  • モーリシャス(MUR ₨)
  • モーリタニア(USD $)
  • オランダ(EUR €)
  • オランダ領アンティル(USD $)
  • カタール(QAR ر.ق)
  • ガイアナ(GYD $)
  • カザフスタン(KZT 〒)
  • カナダ(CAD $)
  • ガボン(XOF Fr)
  • カメルーン(XAF ₣)
  • ガンビア(GMD D)
  • カンボジア(KHR ៛)
  • ギニア(GNF ₣)
  • ギニアビサウ(XOF Fr)
  • キプロス(EUR €)
  • ギリシャ(EUR €)
  • キリバス(AUD AU$)
  • キルギスタン(KGS С̲)
  • グアテマラ(GTQ Q)
  • グアドループ(EUR €)
  • グアム(USD $)
  • グリーンランド(DKK kr)
  • クウェート(KWD دينار)
  • クック諸島(NZD $)
  • クリスマス島(AUD AU$)
  • グレナダ(XCD $)
  • クロアチア(EUR €)
  • ケイマン諸島(KYD $)
  • ケニア(KES Sh)
  • ココス(キーリング)諸島(AUD AU$)
  • コスタリカ(CRC ₡)
  • コモロ(KMF Fr)
  • コロンビア(USD $)
  • コンゴ - キンシャサ(CDF ₣)
  • コンゴ - ブラザビル(XAF ₣)
  • サウジアラビア(SAR ر.س)
  • サウスジョージア・サウスサンドウィッチ諸島(GBP £)
  • サモア(WST T)
  • サントメ・プリンシペ(USD $)
  • ザンビア(USD $)
  • サンピエール島・ミクロン島(EUR €)
  • サンマリノ(EUR €)
  • ジャージー(GBP £)
  • シエラレオネ(SLL Le)
  • ジョージア(USD $)
  • ジブチ(DJF ₣)
  • ジブラルタル(GBP £)
  • ジャマイカ(JMD $)
  • シンガポール(SGD S$)
  • ジンバブエ(USD $)
  • スイス(CHF ₣)
  • スヴァールバル諸島・ヤンマイエン島(USD $)
  • スウェーデン(SEK kr)
  • スペイン(EUR €)
  • スリナム(USD $)
  • スリランカ(LKR Rs)
  • スロバキア(EUR €)
  • スロベニア(EUR €)
  • セネガル(XOF Fr)
  • セルビア(RSD din)
  • セントマーチン(EUR €)
  • セントクリストファー・ネービス(XCD $)
  • セントビンセントおよびグレナディーン諸島(XCD $)
  • セントヘレナ(SHP £)
  • セントルシア(XCD $)
  • ソマリア(SOS Sh)
  • ソロモン諸島(SBD Si$)
  • タイ(THB ฿)
  • タジキスタン(TJS ЅМ)
  • タンザニア(TZS Sh)
  • チェキア(CZK Kč)
  • チャド(XAF ₣)
  • チュニジア(USD $)
  • チリ(USD $)
  • ツバル(AUD AU$)
  • デンマーク(DKK kr)
  • ドイツ(EUR €)
  • トケラウ(NZD $)
  • ドミニカ(XCD $)
  • ドミニカ共和国(DOP $)
  • トリスタンダクーニャ(GBP £)
  • トリニダード・トバゴ(TTD TTD)
  • トルクメニスタン(TMT m)
  • トルコ(USD $)
  • トンガ(TOP T$)
  • ナイジェリア(NGN ₦)
  • ナウル(AUD AU$)
  • ナミビア(USD $)
  • ニウエ(NZD $)
  • ニュージーランド(NZD $)
  • ニューカレドニア(XPF ₣)
  • ニカラグア(NIO C$)
  • ニジェール(XOF Fr)
  • ネパール(NPR ₨)
  • ノルウェー(USD $)
  • ハイチ(USD $)
  • パキスタン(PKR ₨)
  • バチカン市国(EUR €)
  • パナマ(USD $)
  • バヌアツ(VUV Vt)
  • バハマ(BSD BSD)
  • パプアニューギニア(PGK K)
  • バミューダ(BMD BD$)
  • パラオ(USD $)
  • パラグアイ(PYG ₲)
  • バルバドス(BBD BBD)
  • パレスチナ自治区(ILS ₪)
  • ハンガリー(HUF Ft)
  • バングラデシュ(BDT ৳)
  • ピトケアン諸島(NZD $)
  • フィジー(FJD FJ$)
  • フィリピン(PHP ₱)
  • フィンランド(EUR €)
  • フェロー諸島(DKK kr)
  • プエルトリコ(USD $)
  • フォークランド諸島(FKP FKP)
  • ブラジル(USD $)
  • フランス(EUR €)
  • フランス領ギアナ(EUR €)
  • フランス領ポリネシア(XPF ₣)
  • フランス領南方・南極地域(EUR €)
  • ブルガリア(BGN лв)
  • ブルキナファソ(XOF Fr)
  • ブルネイ(BND B$)
  • ブルンジ(BIF ₣)
  • ベリーズ(BZD Be)
  • ペルー(PEN S/)
  • ベトナム(VND ₫)
  • ベナン(XOF Fr)
  • ベネズエラ(USD $)
  • ベラルーシ(USD $)
  • ベルギー(EUR €)
  • ボスニア・ヘルツェゴビナ(BAM КМ)
  • ボツワナ(BWP P)
  • ボリビア(BOB Bs.)
  • ポルトガル(EUR €)
  • ホンジュラス(HNL L)
  • マレーシア(MYR RM)
  • マカオ特別行政区(MOP P)
  • マダガスカル(USD $)
  • マヨット(EUR €)
  • マラウイ(MWK MK)
  • マリ(XOF Fr)
  • マルタ(EUR €)
  • マルティニーク(EUR €)
  • マン島(GBP £)
  • ミクロネシア(USD $)
  • ミャンマー(ビルマ)(MMK K)
  • メキシコ(USD $)
  • モザンビーク(USD $)
  • モナコ(EUR €)
  • モルディブ(MVR ރ.)
  • モルドバ(MDL L)
  • モロッコ(MAD د.م.)
  • モンゴル(MNT ₮)
  • モンテネグロ(EUR €)
  • モントセラト(XCD $)
  • ヨルダン(USD $)
  • ラオス(LAK ₭)
  • ラトビア(EUR €)
  • リトアニア(EUR €)
  • リビア(USD $)
  • リヒテンシュタイン(CHF ₣)
  • リベリア(USD $)
  • ルクセンブルク(EUR €)
  • ルワンダ(RWF ₣)
  • レソト(USD $)
  • レバノン(LBP ل.ل)
  • レユニオン島(EUR €)
  • ロシア(RUB р.)
  • 英領バージン諸島(USD $)
  • 韓国(KRW ₩)
  • 香港特別行政区(HKD HK$)
  • 西サハラ(MAD د.م.)
  • 赤道ギニア(XAF ₣)
  • 台湾(TWD NT$)
  • 中央アフリカ共和国(XAF ₣)
  • 中国(CNY ¥)
  • 東ティモール(USD $)
  • 南アフリカ(USD $)
  • 南極大陸(USD $)
  • 日本(JPY ¥)
  • 米領有小離島(USD $)
  • 北マケドニア(MKD ден)
  • 北マリアナ諸島(USD $)
/ /

How to Clean and Service Your Gobo Projector

Nov 22,2024 | JINGYU OPTOELEC

 
Gobo projectors can last many years if properly cared for and maintained. Anyone with basic mechanical and technical skills can remedy most projector problems through careful cleaning and inspection. To avoid causing damage, however, it’s important to follow the recommended steps for your projector model. (Please note that Gobofactory does not accept responsibility for unit failure or personal injury due to cleaning or repairs attempted incorrectly.)

 

Below we share step-by-step instructions on how to clean gobo projectors, both interior and exterior models. For projectors that are exposed to a high amount of dust and dirt, such as a warehouse or exterior installation, the following steps should be performed every 1-3 months. In a low-dust environment, such as an office or retail space, cleaning is necessary only every 1-2 years.

 

We’ve also shared a gobo projector troubleshooting cheat sheet for common gobo projector problems below the full cleaning instructions.

 

How to Clean the ECO Spot Interior LED10, C-25, C40/40+, C60/60+, B90 and B150 Gobofactory Projectors:

 

  1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
  2. Unscrew 4-8 screws (depending on the model) on the outside perimeter of the backplate with a Phillips screwdriver.
  3. Carefully take out your retaining ring for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
  4. After the backplate is unscrewed, carefully pull the projector straight back out of the aluminum projector housing. It should slide straight out along the side rails.
  5. Clean the projector by blowing out the dust from the fans and heat sink with compressed air. Prevent the fan blades from spinning at high speed when using air, as this may damage the bearings. Gently blow dust from other parts.
  6. Clean inside and outside of the aluminum housing with a damp rag or paper towel and wipe dry.
  7. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
  8. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
  9. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
  10. When done, slide the projector back into the projector housing by lining up the two side slots on the front with the two slider rails. Slide straight forward until it’s all the way in place.
  11. Carefully screw in the backplate screws, making sure not to strip them. Once the backplate is tight, the gobo projector is successfully reassembled.
     

    Download a PDF version with visuals for LED10, C-25, C40/40+, and C60/60+ here.

    Download a PDF version with visuals for LEDB90 and B150 here.

    How to Clean Exterior Gobofactory Projector Models:


    1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
    2. Unscrew 4-8 thumb screws on the faceplate. Be careful not to lose your rubber seals and washers.
    3. Carefully take out your retaining clip for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
    4. Clean the front of the projector by blowing out the dust from the gobo holder assembly using compressed air. Then blow out the back of the unit through the fan air slots, removing as much dust from the mesh cage as possible.
    5. Clean the outside of the aluminum housing with a damp rag or paper towel and wipe dry.
    6. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
    7. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
    8. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
    9. When done, put the faceplate back on using the rubber seals, washers, and thumb screws.

    Gobo Projector Troubleshooting Cheat Sheet:


    Problem Cause Solution
    Projector gets louder or shuts off mid-use Dust build-up, fan failure Cleaning step #5 (interior); #4 (exterior)
    Specks, smudges, or other blemishes on the projected image Dirty gobo or lens Cleaning steps #8 & #9 (interior); #7 & #8 (exterior)
    After servicing, the projected image is uneven, darker, and hard to focus Misaligned front plate Check if the lens is in line with the gobo, if not, rotate the front plate 180 degrees

    It’s our goal to ensure your projector functions at its best over its entire lifespan, so if you have any questions about cleaning your Gobofactory projector, reach out to customer service at 86 13456752363 for assistance.

コメントを投稿

名前
メールアドレス
コメント